ACU-RITE Micro-Line T - Manual (Page 32)

MICRO-LINE Reference Manual
REFERENCE
29
Keypad
Here’s an overview of the MICRO-
LINE keypad. Each key’s function
is described below.
ABS/INCR
Used to switch between absolute (ABS)
and incremental (INCR) measurements.
The active mode will be displayed at the
top of the DRO display.
RAD/DIA
Used to switch between radius (RAD)
and diameter (DIA) dimensions. The
DIA indicator will light up when diam-
eter is displayed.
MM Press this key to switch the X and Z dis-
plays between English and metric units.
X, Z
ZERO
Correspond with the scales on the X-,and
Z-axes. Used to specify a change to a partic-
ular axis.
These keys reset the incremental or
absolute display position at “0” for the
corresponding axis.
SETUP
Provides access to the display resolution,
linear error compensation and scale count
direction.
MLTmanual.QXD 2/12/02 4:10 PM Page 28