ACU-RITE 300S - Manual (Page 77)

300S 63
I - 4 T
u
rn
ing Specific Oper
ations
Passes
8 NUMBER or DEPTH will be displayed. Toggle the soft key for user
preference.
8 NUMBER: Enter the number of normal passes, or.
8 DEPTH: Enter the depth dimension for a normal pass.
8 FINISH PASS: (optional) Enter the depth dimension for the finish
pass, or leave blank.
„ Finish pass is in addition to the normal passes, and is included in
the total cut depth.
8 Press the DOWN arrow key.
Thread
8 Select either INCH, or MM by toggling the soft key.
8 Enter the number of threads per inch, or pitch in MM.
„ The Thread Cycle parameters are now entered.
8 Press ENTER to run the program.
8 Press the C key to exit the program, and return to the normal
display.