Example: enter data and execute a circle pattern, I - 3 milling specific oper ations – ACU-RITE 300S User Manual
Page 56
42
I
I - 3 Milling Specific Oper
ations
Example: Enter data and execute a circle pattern.
1st step: Enter data
8
Press FEATURES soft key.
8
Press CIRCLE PATTERN soft key.
8
Press UP/DOWN hard keys to select pattern 1.
8
Press ENTER hard key.
8
Press FULL/SEGMENT soft key until FULL is selected.
8
Press DOWN ARROW hard key to move to the next field.
8
Enter 4 for the number of holes.
8
Enter X= 2.0”, Y= 1.5” for the circle pattern center location.
8
Enter 5” for the radius of the circle pattern.
8
Enter 25° for the start angle.
8
The end angle is 295°, and can not be changed because the pattern
is full.
8
Enter depth of -.25”.
The depth of the hole is optional, and may be left blank.
8
Press ENTER