ACU-RITE 300S - Manual (Page 55)

300S 41
I - 3 Milling Specific Oper
ations
Circle, or Linear Pattern Execution
8 To execute a circle, or linear pattern, highlight the pattern to be
executed in the table.
8 Press the RUN soft key.
„ The 300S then calculates the positions of the holes. It can also
provide a graphical view of the hole pattern.
The following soft keys are available while running a Circle, or
Linear Pattern
Function Soft key
Press to select the graphic view of the pattern.
Available in both incremental DRO, or
absolute DRO.
Press to select the previous hole in the pattern.
Press to select the next hole in the pattern.
Press to end execution of the pattern.
Press the VIEW soft key to toggle the views between
distance-to-go positions, graphic view, and
absolute positions.