Acnodes PC 6415 - Manual (Page 28)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
PC 6415
15” Fanless Panel PC
4.5 REMOVING THE REAR PANEL
To access the PC Series-N270 internally the rear panel must be removed. To remove
the rear panel, please follow the steps below.
Step 1: Place the PC Series-N270 face down on a flat surface.
Step 2: Remove the retention screws (Figure 4-1).
Step 3: Lift the cover off and pull down the cover a bit to make it possible to lift the
cover further more after removing the retention screws. More strength is required to
separate the cover from the chassis.
4.6 CF CARD INSTALLATION
The PC Series-N270 has one CF Type II slot inside the rear panel. The slot can be
accessed without removing the back cover. To install the CF card, follow the instruc-
tions below.
Step 1: Locate the CF slot cover. Remove the retention screw and cover (Figure 4-2).