Rmc 5015, Appendix c system specifications – Acnodes RMC 5015 User Manual
Page 76
661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2005 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 5015
1U Rackmount System
Appendix C SYSTEM SPECIFICATIONS
Processors
RMC5015: embedded Intel® Atom™ 330 dual-core 1.6 GHz processor
Chipset
Intel 945GC/ICH7R chipset
BIOS
4 Mb AMI SPI Flash ROM
Memory Capacity
Two 240-pin DIMM slots that can support up to 2 GB of unbuffered non-ECC DDR2-533/400 SDRAM
Note: See the memory section in Chapter 5 for details.
SATA Controller
On-chip (ICH7R) 3 Gb/s Intel SATA controller
Hard Drive Support
Up to two internal 2.5" drives or one internal 3.5" drive
PCI Expansion Slots
One PCI-E x8 slot
Motherboard
RMC5015: Embedded board (Flex ATX) Dimensions: 9 x 7.5 in (229 x 191 mm)
Chassis
Embedded board (mini 1U Rackmount)
Dimensions (both): (WxHxD) 17.2 x 1.7 x 9.8 in. (437 x 43 x 249 mm)