Acnodes RMC 5015 - Manual (Page 11)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 5015
1U Rackmount System
1-2 Motherboard Features
At the heart of the Acnodes RMC5015 lies the embedded board, a single processor, low-power
motherboard based upon Intel's 945GC chipset. Below are the main features of the embedded board.
Processor
The X7SLA-H supports one Intel® Atom™ 330 Dual-core 1.6 GHz processor while the X7SLA-L
supports one Intel® Atom™ 230 Single-core 1.6 GHz processor. The processors are embedded into
the motherboard.
Memory
The embedded board has two 240-pin DIMM slots that can support up to 2 GB of non-ECC DDR2-
533/400 SDRAM.
Onboard SATA
A SATA controller is built in to the ICH7R portion of the chipset to provide support for a four port, 3 Gb/
sec Serial ATA subsystem.
PCI Expansion Slots
The embedded board has one PCI-Express x8 slot, one PCI-Express x4 (in a x8 slot) and one 32-bit
PCI slot.
Onboard Controllers/Ports
An onboard IDE controller supports two IDE devices. Onboard I/O backpanel ports include one COM
port, a VGA port, PS/2 mouse and keyboard ports, a Gb LAN port and two USB ports. In additiona, the
embedded board features two Gb LAN ports and an extra internal COM port (header).
Other Features
Other onboard features that promote system health include voltage monitors, a chassis intrusion
header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection and
BIOS rescue.