Rmc 5015, 4 security settings – Acnodes RMC 5015 User Manual

Page 69

661 Brea Canyon Rd., Suite 3

Walnut, CA 91789

tel: 909.598.7388, fax: 909.598.0218

are subject to change without notice. For latest product information,

please visit Acnodes’ web site at www.acnodes.com.

RMC 5015

1U Rackmount System

7-4

Security Settings

The AMI BIOS provides a Supervisor and a User password. If you use both pass- words, the Supervi-
sor password must be set first.

Change Supervisor Password:

Use this feature to set a supervisor password. It secures the system from unau- thorized use by
restricting access to persons only with the proper supervisor-level password. Select this feature and
press , and then type in the Supervisor Password.

User Access Level

This feature appears when the Supervisor Password is set. Use this to assign an access level for a
user. The options are: No Access, View Only, Limited, and Full Access.

Change User Password:

Use this feature to set a user password. It secures the system from unauthorized use by restricting
access to persons only with the proper user-level password. Select this feature and press ,
and then type in the User Password.

Clear User Password

This feature appears when the User Password is set. Select this to clear the User Password.