Acnodes RMC 5015 - Manual (Page 55)

661 Brea Canyon Rd., Suite 3
Walnut, CA 91789
tel: 909.598.7388, fax: 909.598.0218
© Copyright 2009 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 5015
1U Rackmount System
Starting the Setup Utility
Normally, the only visible POST (Power On Self Test) routine is the memory test. As the memory is
being tested, press the key to enter the main menu of the AMI BIOS Setup Utility. From
the main menu, you can access the other setup screens. An AMI BIOS identification string is dis-
played at the left bottom corner of the screen, below the copyright message.
Warning!! Do not shut down or reset the system while updating BIOS to prevent possible
boot failure.
7-2 Main Setup
When you first enter the AMI BIOS Setup Utility, you will enter the Main setup screen. You can always
return to the Main setup screen by selecting the Main tab on the
top of the screen. The Main BIOS Setup screen is shown below.