Accusys ExaSAN A12S2-PS - Manual (Page 53)

4. How to Use
User Guide Page 4-2
Equalization
Mode
Enable/ Disable Equalization
5 Option
Slicing Divide an existing array into multiple slices.
LUN Map Map volumes of slices to the LUN of the host
Expansion
Increase total capacity of an array by adding
spare drives
Migration
Migrate current RAID level to a selected RAID
level
Snapshot
Create mirror(s) of existing volumes of array for
backup
Health Center Repair and maintain arrays
Unlock Drives Change the locked drive(s) status
4.1 Accessing the RAIDGuardX GUI
4.1.1 RAIDGuard X Client and Server
This chapter details the usage of the RAIDGuard X Client/Server. Before you can access
the RAID controller, you must load the RAIDGuard X Server on the host server.
RAIDGuard X Client
When installing RAIDGuard X, the software and drivers are automatically installed in
your Host. The RAIDGuard X interface will display RAID systems connected to the Host
via PCIe cable.
To access RAIDGuard X Client:
For Macs: Go -> Application -> RAIDGuard X -> RAIDGuard X Client
For Windows: Start -> Program -> Accusys -> RAIDGuard X -> RAIDGuard X Client
RAIDGuard X Server