Accusys ExaSAN A12S2-PS - Manual (Page 15)

1. Introduction
User Guide Page 1-7
• Windows XP/2003/Vista/2008 and Windows 7(32/64-bit, Miniport and Storport
driver, WHQL certified)
• Linux: Red Hat, SUSE, Fedora, CentOS, Debian, etc.
• MAC: OS X( 10.5, 10.6, 10.7 and later)
8. Operating Conditions
• Humidity: 5% - 85%
• Operating Temperature: 0C – 40C
• Certification: RoHS, UL, CE, FCC, C-Tick, BSMI
9. QSFP HBA
• 20Gb/s PCIe Channel PCIe2.0 x4
• Short, low profile, form factor card
• Dimension 110 x 68.9 mm
• Standard bracket (low profile available)
10. QSFP Cable
• Connector PCI Express 2.0 x4
• Copper cable support Length: 2M
• Optical cable support Length: 10M, 30M, 50M, 100M
1.2 Unpacking the System
Your ExaSAN A12S2-PS is shipped in special packaging to provide protection during
transportation, as well as to facilitate simple and safe removal from the carton(s). Note
that different components may be shipped in separate cartons.
1.2.1 What Is In Your Order
Your ExaSAN System Integrator/Value Added Reseller should have helped you assess,
identify, and order all necessary system components and accessories. If you ordered
the complete system solution, your order includes everything described in Section 1.3.
Note that there are generic system components and accessories required by the
ExaSAN solution architecture, but they are not sold by your ExaSAN System
Integrator/Value Added Reseller and therefore not included in your ExaSAN A12S2-PS
order. Please refer to Section 1.5, “What Else You Need” for additional information.
1.2.2 Checking the Equipment You’ll Need
Section 1.1.3 has a complete list of all the equipment you’ll need to set up the ExaSAN
A12S2-PS. Check carefully against that list; verify that you have all of the system
components and accessories before commencing hardware installation.