Accusys ExaSAN A12S2-PS - Manual (Page 112)

Appendices
User Guide Page 4
b. Please check the jumper switch on the HBA. When the switch is in the "On”
position, the HBA card is enabled for storage mode for the A12S2-PS. In the
“1” position, the HBA is enabled for switch mode for the SW04/08.
c. Please check if the installer and the driver have been installed correctly. If the
installation has completed and the error still persists, it may be a compatibility
issue. Send an email to [email protected] and briefly describe the
problem. Be sure to include the driver error code, the motherboard (or host)
model name and the OS. We will contact you to assist you in resolving the
issue.