Accusys ExaSAN A12S2-PS - Manual (Page 45)

3. Installation
User Guide Page 3-15
RAIDGuardX Installation
Before installing RAIDGuard X, make sure the RAID HBA drivers is already installed in your
Linux OS.
1. Insert the CD-ROM into the CD-ROM drive of the server or PC.
2. Open CD ROM/GUI/Server/Linux/AP/i386 or x86_64/AP_Accusys. Open a terminal
window on the folder and enter the following commands:
# cat /proc/devices
Example:
Check the “ACS_CDEV” device number. For example, if the “ACS_CDEV” device
number is “$$$".
# mknod /dev/ACS_CDEV0 c $$$ 0
Example:
# cd /root/
# unzip RAIDGuard X Server x.x.zip