HONDA 2010 Odyssey - Manual (Page 52)

Whatever type you have, follow
the child seat maker’s instructions
for adjusting or tightening the fit.
Other LATCH-compatible seats have
a flexible-type connector as shown
above. Lift the head restraint (see page
), then route the tether strap
through the legs of the head
restraint, over the seat-back and
through the grab rail.
Attach the tether strap hook to the
anchor, making sure the strap is
not twisted, then tighten the strap
according to the seat maker’s
instructions.
If the tether strap is too long and
cannot be tightened firmly, find a
route where the strap can be
tightened securely.
Push and pull the child seat
forward and from side-to-side to
verify that it is secure.
4.
5.
6.
7.
172
CONTINUED
Installing a Child Seat
Dr
iv
er
and
P
asseng
er
Saf
e
ty
49
ANCHOR
TETHER
STRAP HOOK TETHER STRAP
Flexible type
2010 Odyssey