HONDA 2010 Odyssey - Manual (Page 134)

With ‘‘WIPER SETUP’’ shown on the
multi-information display, press the
SEL/RESET button on the steering
wheel. The display changes to
‘‘FRONT WIPER ACTION’’ as
shown above.
You can select from these two
settings when the wiper switch is in
the INT (intermittent) position:
WITH VEH SPD The intermittent
operation varies according to vehicle
speed.
INTERMITTENT The
intermittent operation varies
according to the selection you make
on the wiper lever’s intermittent
control ring.
Press the SEL/RESET button. The
display changes as shown above.
Press the INFO button to select
‘‘WITH VEH SPD’’ or
‘‘INTERMITTENT,’’ and enter your
selection by pressing the SEL/
RESET button.
CONTINUED
Wiper Setup Front Wiper Action
Multi-Information Display
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
131
2010 Odyssey