HONDA 2010 Odyssey - Manual (Page 142)

The select/reset knob on the
instrument panel controls the
brightness of the instrument panel
lights. Turn the knob to adjust the
brightness.
Separate adjustments can be made
when the headlights are on and off.
You will hear a beep when maximum
or minimum brightness is reached.
You will also hear a beep when the
maximum level is canceled by
turning the knob a click to the left.
To reduce glare at night, the
instrument panel illumination dims
when you turn the light switch to
or . Turning the select/
reset knob to the right until you hear
a beep will cancel the reduced
brightness.
The level of brightness is shown on
the multi-information display
(Touring models) or on the
information display (LX, EX, EX-L
and Canadian DX models) while you
adjust it. It goes out 5 seconds after
you finish adjusting.
Instrument Panel Brightness
Inst
ru
m
e
nt
s
a
nd
Cont
ro
ls
139
BRIGHTNESS LEVEL
SELECT/RESET KNOB
Touring model is shown.
2010 Odyssey