HONDA 2010 Odyssey - Manual (Page 342)

To set the incoming notification, do this: If you say, ‘‘Prompt.’’ HFL responds
‘‘An incoming call prompt will be
used.’’ You will hear a ‘‘You have an
incoming call.’’ prompt when
receiving an incoming call.
Press and release the Talk button.
After the beep, say ‘‘System setup.’’
HFL responds ‘‘System setup
options are security, change
passcode, call notification, auto
transfer, and clear. Press the Talk
button and say a command.’’
Press and release the Talk button.
After the beep, say ‘‘Call
notification.’’
HFL responds: ‘‘Would you like
the incoming call notification to be
a ring tone, a prompt, or off?’’
Press and release the Talk button.
After the beep, for example, say
‘‘Ring tone.’’
HFL responds ‘‘A ring tone will be
used.’’ You will hear a ring tone
through the audio speakers to
announce an incoming call.
HFL responds ‘‘1, 2, 3, 4. Is this
correct? Press the Talk button and
say Yes or No.’’
If you say, ‘‘Off,’’ no audible
notification of an incoming call will
be selected. During an incoming call,
there is no ring tone or prompt
playback. The audio system will still
mute, and the HFL message will be
displayed.
Press and release the Talk button.
After the beep, say ‘‘Yes.’’
HFL responds ‘‘Security passcode
has been changed.’’
2.
1.
3.
4.
5.
Bluetooth HandsFreeLink
Fe
a
tu
re
s
339
2010 Odyssey