Tires – HONDA 2010 Odyssey User Manual
Page 459
When installing cables, follow the
manufacturer’s instructions, and
mount them as tight as you can.
Make sure they are not contacting
the brake lines or suspension. Drive
slowly with them installed. If you
hear them coming into contact with
the body or chassis, stop and
investigate. Remove them as soon as
you begin driving on cleared roads.
The previously listed chains are the
only ones that have been approved
by Honda for use on your vehicle.
Since Honda cannot test all chains,
you must be personally responsible
for proper selection, installation, and
use of tire chains.
These chains are available at many
auto supply stores. For a complete
list of stores, visit the SCC website at
www.scc-chain.com. When installing
chains, follow the manufacturer’s
instructions, and mount them as
tightly as you can. Drive slowly with
chains installed.
Because your vehicle has limited tire
clearance, Honda strongly
recommends using the chains listed
below.
Mount tire chains on your tires when
required by driving conditions or
local laws. Install them only on the
front tires.
Link-type: SCC Quick Grip QG1142
Cable-type: SCC SC Cable SC1042
Link-type: SCC Quick Grip QG1138
Cable-type: SCC SC Cable SC1038
All except Touring models
On Touring models
Tires
Tire Chains
456
2010 Odyssey