HONDA 2010 Odyssey - Manual (Page 469)

Use the extension and the wheel
nut wrench as shown to raise the
vehicle until the flat tire is off the
ground. Before mounting the spare tire,
wipe any dirt off the mounting
surface of the wheel and hub with
a clean cloth. Wipe the hub
carefully; it may be hot from
driving.
Do not attempt to forcibly pry the
wheel cover off with a screwdriver or
other tool. The wheel cover cannot
be removed without first removing
the wheel nuts.
Remove the wheel nuts, then
remove the flat tire. Handle the
wheel nuts carefully; they may be
hot from driving. Place the flat tire
on the ground with the outside
surface facing up. 13. 14. 15.
On LX and Canadian DX models
Changing a Flat Tire
466
EXTENSION WHEEL COVER
HUB
WHEEL NUT
WRENCH
2010 Odyssey