HONDA 2010 Odyssey - Manual (Page 233)

In MP3 or WMA mode In MP3 or WMA mode
To
select a different folder, turn the
TUNE knob to move to the
beginning of the next folder. Turn
the knob to the right until it clicks
once to skip to the next folder, and to
the left to move to the beginning of
the current folder. Turn it again to
skip to the beginning of the previous
folder. Turning the TUNE knob
more than two clicks skips several
folders.
The scan function samples all tracks
(files in MP3 or WMA) on the disc in
the order they are recorded on the
disc. To activate scan, press and hold
the SCAN/RPT button. You will see
SCAN in the display. You will get a
10 second sampling of each track/
file on the disc. Press and hold the
SCAN/RPT button for about 2
seconds to get out of scan mode and
play the last track/file sampled. This
feature, when activated, samples the
first file of each folder on the disc.
To activate folder scan, press and
hold the SCAN/RPT button to select
SCAN, then press and release the
button again to select folder scan.
You will see F-SCAN in the display.
The system plays the first file in the
first folder for about 10 seconds. If
you do nothing, the system will then
play the first files in the next folders
for 10 seconds. After playing the first
file of the last folder, the system
plays normally.
Each time you press and release the
SCAN/RPT button, the mode
changes from file scan to folder scan,
then to normal playing.
Playing a Disc (LX and Canadian DX models)
FOLDER SELECTION
SCAN (TRACK/FILE SCAN)
F-SCAN (FOLDER SCAN)
230
2010 Odyssey