HONDA 2010 Odyssey - Manual (Page 440)

Your vehicle has halogen headlight
bulbs, two on each side. When
replacing a bulb, handle it by its base
and protect the glass from contact
with your skin or hard objects. If you
touch the glass, clean it with
denatured alcohol and a clean cloth.
The high beam headlight bulb and
the low beam headlight bulb are
replaced the same way.
Open the hood. To change the
high beam headlight bulb on the
passenger’s side, remove the
power steering fluid reservoir
from its holder by pulling it
straight up.
The headlights were properly aimed
when your vehicle was new. If you
regularly carry heavy items in the
cargo area or pull a trailer,
readjustment may be required.
Adjustments should be done by your
dealer or other qualified technician.
1.
CONTINUED
Lights
Headlight Aiming Replacing a Headlight Bulb
Ma
int
e
na
nce
437
POWER
STEERING
FLUID
RESERVOIR Passenger’s side
Halogen headlight bulbs get very hot
when lit. Oil, perspiration, or a scratch
on the glass can cause the bulb to
overheat and shatter.
2010 Odyssey