HONDA 2010 Odyssey - Manual (Page 410)

Any hitch used on your vehicle must
be properly bolted to the underbody,
using the six threaded holes
provided. A hitch and the required
fluid coolers designed especially for
your Odyssey can be obtained from
your Honda dealer.
If the total trailer weight is more
than 1,850 lbs (840 kg), you must
also use a weight distributing hitch.
This device transfers weight from
the vehicle’s rear wheels to the front
wheels, and to the trailer’s wheels.
Carefully follow the hitch maker’s
instructions for proper installation
and adjustment.
Always use safety chains when you
tow a trailer. Make sure the chains
are secured to the trailer and hitch,
and that they cross under the tongue
and can catch the trailer if it
becomes unhitched. Leave enough
slack to allow the trailer to turn
corners easily, but do not let the
chains drag on the ground. If the total trailer weight exceeds
2,000 lbs (900 kg), you should install
a sway control device to minimize
swaying that can occur in crosswinds
and in normal and emergency
driving maneuvers. Your trailer
maker can tell you what kind of sway
control you need and how to install it.
To help prevent overheating, a
transmission fluid cooler and a
power steering fluid cooler are
required for trailer towing. These
coolers are available only from your
Honda dealer.
CONTINUED
Hitches
Weight Distributing Hitch
Saf ety Chains Sway Control
Transmission Fluid Cooler and
Power Steering Fluid Cooler
Towing a Trailer
D
riv
ing
407
2010 Odyssey