Changing a flat tire – HONDA 2010 Odyssey User Manual
Page 473
You can store the flat tire on the top
of the folded third row seat.
Pull up the U-shaped carpet piece,
fold it, and tack the end under the
carpet.
Remove the spacer, and unfasten
the plastic screw with a coin.
Remove the center cap before
storing the flat tire.
Store the spacer, plastic screw and
center cap in a noticeable place.
Place the flat tire face down on the
attachment point. Put the spacer
cone on the flat tire as shown.
Poke holes in the vinyl bag. Secure
the flat tire into the attachment
point by tightening the tire
mounting wing bolt through the
center cap hole of the flat tire
wheel.
Follow step 22 through 26 on
pages
and
1.
2.
3.
4.
5.
On EX, EX-L and Touring models
Changing a Flat Tire
Storing a Flat Tire on the Folded
Third Row Seat
470
TIRE MOUNTING
WING BOLT
ATTACHING POINT
SPACER
PLASTIC SCREW
SPACER CONE
2010 Odyssey