HONDA 2010 Odyssey - Manual (Page 334)

CONTINUED
Press and release the Talk button.
After the beep, say ‘‘Yes.’’ HFL
responds ‘‘Entering phone set up:
pair menu. The pairing process
requires operation of your
Bluetooth phone. For safety, only
perform this function while the
vehicle is stopped.’’
HFL responds ‘‘For proper system
function a compatible Bluetooth
phone is required. Please visit the
HandsFreeLink website, listed in
the owner’s manual, for a list of
approved phones and other system
information. HandsFreeLink is
waiting to pair with a Bluetooth
phone. From your phone, search
for Bluetooth devices and select
HandsFreeLink.’’ During the pairing process, turn
off any previously paired phones
before pairing a new phone.
Each time a phone is paired with
HFL, the system selects a pairing
code randomly or sequentially.
You can switch this setting
between random mode and fixed
mode. To select a pairing code
setting between Random and
Fixed, refer to page
.
If after three minutes your phone
is not ready to pair or a phone is
not found, the system will time out
and return to idle.
Park your vehicle. With your
phone on and the ignition switch in
the ACCESSORY (I) or ON (II)
position, press and release the
Talk button.
HFL prompts ‘‘Welcome to
Bluetooth HandsFreeLink. This
system enables hands-free usage
of a mobile phone. Before using
this system, a phone needs to be
paired or connected with
HandsFreeLink. Would you like to
pair a phone now? Press the
Bluetooth HandsFreeLink Talk
button, and after the beep, say Yes,
to begin the pairing process, or No,
to continue.’’
HFL responds ‘‘When prompted
by your mobile phone, enter the
pairing code:
1234 .’’
Go to Step 4.
1.
2.
For example :
336
To pair your first phone, follow the
prompts on the HFL system:
Bluetooth HandsFreeLink
Fe
a
tu
re
s
331
2010 Odyssey