FIAT Panda User Manual

Page 38

A Air temperature knob (red=hot/blue=cold)fig. 29
B Air recirculation knob fig. 29

internal air recirculation

air intake from outside

IMPORTANT It is advisable to switch the air
recirculation on whilst queuing or in tunnels, or
whilst driving on dusty roads, to prevent the
introduction of polluted air. However, it is better not
to use the function for long periods, particularly if
there are many people on board, to prevent the
windows from misting.
C Air distribution knob fig. 29

towards the body and the side windows

towards the body, the side windows and the feet
toward the feet mainly
towards the feet and the windscreen

towards the windscreen only

D Heated rear window, folding mirror/heated

windscreen (for versions/markets, where available)
activation/deactivation button fig. 29.

The LED on the button lights up to indicate
activation.
In order to maintain battery efficiency, the function is
automatically deactivated after about 20 minutes.

E Fan speed and climate control system activation/

deactivation knob fig. 29 (for versions/markets,
where provided). Press the knob to activate
the climate control system; the LED on the knob
switches on. This enables rapid cooling of the
passenger compartment. .

Note To stop the air flow from the vents turn the
knob to 0.

PASSENGER COMPARTMENT
VENTILATION

To ventilate the passenger compartment well,
proceed as follows:
❒ turn knob A fig. 29to the blue section;
❒ Turn selector B to external air recirculation

;

❒ turn knob C to ;
❒ turn knob E to the desired speed.

CLIMATE CONTROL (cooling - for
versions/markets, where provided)

For fast cooling of the passenger compartment,
proceed as follows:
❒ turn knob A fig. 29to the blue section;
❒ turn knob B to internal air recirculation

;

❒ turn knob C to ;

GETTING TO

KNOW YOUR CAR

SAFETY

STARTING AND

DRIVING

WARNING LIGHTS

AND MESSAGES

IN AN EMERGENCY

SERVICING AND

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX