FIAT Panda - Manual (Page 162)

DIRECTION INDICATORS
Front
To change the bulb, proceed as follows:
❒ remove cover B fig. 125;
❒ turn the bulb holder anticlockwise, extract the
bulb and replace it;
❒ refit the new bulb on the connector making sure
that it is locked correctly, then reinsert the
connector in its housing rotating it clockwise;
Side
To change the bulb, proceed as follows:
❒ adjust the lens A fig. 127 to compress in the
internal catch B, then pull the unit outwards;
❒ turn the bulb holder C anticlockwise, extract the
bulb and replace it;
❒ refit the bulb holder C in the lens and turn it
clockwise;
❒ refit the unit making sure that the internal catch B
clips into position.
FOG LIGHTS
(for versions/markets, where provided)
Replace the bulb as follows:
❒ steer the wheel completely;
❒ adjust the screws A fig. 133 and remove the flap B;
fig. 127 F0W0209
fig. 128 F0W0197
158
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX