FIAT Panda - Manual (Page 226)

FLUIDS AND LUBRICANTS
Your car is equipped with an engine oil that has been thoroughly developed and tested in order to meet the
requirements of the Scheduled Servicing Plan. Constant use of the prescribed lubricants guarantees the
fuel consumption and emission specifications. Lubricant quality is crucial for engine operation and duration.
Use
Fluid and lubricant specifications for
correct car operation
Genuine fluids and
lubricants
Replacement interval
Lubricants for
0.9 TwinAir
Turbo 85 HP
and 1.2 8V 69
HP petrol
engines
SAE 5W-40 ACEA C3 grade totally synthetic
lubricant. FIAT Classification 9.55535-S2.
SELENIA K P.E.
Contractual Technical
Reference No.
F603.C07
According to Scheduled
Servicing Plan
Lubricants for
0.9 TwinAir 65
HP petrol
engines
SAE 0W-30 ACEA C2 grade totally synthetic
lubricant. FIAT Classification 9.55535-GS1.
SELENIA DIGITEK
P.E.
Contractual Technical
Reference no. F020.B12
According to Scheduled
Servicing Plan
Diesel engine
lubricants SAE 5W-30 ACEA C2 grade totally synthetic
lubricant FIAT Classification 9.55535-S1.
SELENIA WR P.E.
Contractual Technical
Reference No.
F510.D07
According to Scheduled
Servicing Plan
In case of emergency, if lubricants with the prescribed specifications are not available, products with the
minimum indicated ACEA performance can be used for topping up; in this case optimal performance of the
engine is not guaranteed.
For MultiAir/TwinAir system engines only use lubricants with indicated SAE grade and specifications.
The use of products with different specifications than those indicated above could cause
damage to the engine not covered by the warranty.
222
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX