FIAT Panda User Manual
Page 259
PRESET BUTTONS
The buttons numbered from 1 to 6 are used to set
the following preset stations:
❒ 18 in the FM band (6 in FM1, 6 in FM2, 6 in FMT or
"FMA" (on some versions);
❒ 12 in the MW band (6 in MW1, 6 in MW2).
To listen to a preset station, select the desired
frequency band and then briefly press the
corresponding preset button (from 1 to 6).
By pressing the preset button for more than 2
seconds, the tuned station will be stored. The storing
phase is confirmed by an acoustic signal.
STORING THE LAST STATION LISTENED
TO
The radio automatically stores the last station that
was selected for each reception band, which is then
tuned into when the radio is turned on or when the
reception band is changed.
AUTOMATIC TUNING
Briefly press the
or
button to start the
automatic tuning search for the next station that can
be received in the selected direction.
If the
or
button is pressed down longer, the fast
search starts. When the button is released, the tuner
will stop on the next station that can be received.
If the TA function (traffic alerts) is on, the tuner will
only search for stations that broadcast traffic news.
MANUAL TUNING
This is used to manually search for stations in the
preselected band.
Select the desired frequency band and then press the
or
button briefly and repeatedly to start the
search in the desired direction.
If the or
buttons are pressed longer, the fast
search will start and then stop when the button is
released.
255
SOUND-S
YSTEM