FIAT Panda User Manual

Page 249

FADER ADJUSTMENT

Proceed as follows:
❒ Select the "Fader" setting in the AUDIO menu

using the

button;

❒ press the button to increase the sound from the

rear speakers or the

button to increase the

sound from the front speakers.

By pressing the buttons briefly, the levels will change
progressively. By holding them down longer, the levels
will change quickly.
Select the value "

" to set the same level for

the front and rear audio outputs.

LOUDNESS FUNCTION

The Loudness function improves the volume of the
sound whilst listening at low volumes, increasing the
bass and treble.
To activate/deactivate the function, select the
Loudness setting of the AUDIO menu using the

buttons.

The condition of the function (on or off ) is shown on
the display for a few seconds by the wording
“Loudness On” or “Loudness Off”.

EQ FUNCTION
(equaliser activation/deactivation)

The built-in equaliser can be activated/deactivated.
When the equaliser function is off, the audio settings
can only be changed by adjusting the “Bass” and
“Treble” settings, whereas when the function is on,
the acoustic curves can be adjusted. To turn off the
equaliser, select the "EQ OFF" function using the

buttons.

To turn the equaliser on, use the

buttons to

select one of the adjustments:
❒ “FM/AM/CD...EQ User” (adjustment of 7 equaliser

bands that can be changed by the user);

❒ “Classic” (equaliser preset for optimal classical

music sound);

❒ “Rock” (equaliser preset for optimal rock and pop

music sound);

❒ "Jazz" (equaliser preset for optimal jazz music

sound).

When one of the equaliser settings is activated the
letters "EQ" light up.

245

SOUND-S

YSTEM