FIAT Panda - Manual (Page 116)

"ISOFIX" CHILD SEAT SETUP
The car can be fitted with a Universal Isofix child
seat, a new European standardised system for
carrying children safely.
Isofix systems can be fitted alongside a traditional
child seat. An example of Universal Isofix child seat
covering weight group 1 is shown in fig. 100. Specific
Isofix child seats cover the other weight groups.
These seats must be designed, tested and
type-approved specifically for this car (see the list of
cars attached to the child seat).
IMPORTANT The rear central seat (for versions
where provided) and the passenger front seat are not
approved for any type of Isofix child seat.
INSTALLING A UNIVERSAL ISOFIX CHILD
SEAT
Secure the seat using the special lower metal rings A
fig. 101 positioned between rear backrest and
cushion, then fix the upper belt (provided with the
child seat) to the attachments B fig. 10
located
in the rear part of the backrest, for versions with
split rear seat.
For versions with sliding split rear seat, use the
suitable catches shown in fig. 103 on the tube at the
base of the backrest.
"Universal Isofix” child seats can be fitted alongside
traditional child seats. Remember that when using
a Universal Isofix child seat, you can only use
approved child seats with the marking ECE R44
“Universal Isofix”.
fig. 100 F0W0016
112
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
2