FIAT Panda - Manual (Page 213)

WHEELS
RIMS AND TYRES
Pressed steel or alloy rims. Tubeless radial carcass
tyres. All approved tyres are listed in the registration
document.
IMPORTANT If there are any discrepancies between
the Owner handbook and the registration document,
take the information from the latter. For safe driving,
the car must be fitted with tyres of the same make
and type on all wheels.
IMPORTANT Do not use tubes with tubeless tires.
SPACE-SAVER WHEEL
Pressed steel rim. Tubeless tyre.
WHEEL GEOMETRY
Front wheel toe-in measured from rim to rim: 1 ± 1
mm
The values refer to the car in running order.
CORRECT TYRE READING
Example fig. 161: 185/55 R 15 82T
185 Rated width (S, distance in mm between
sidewalls)
55 Height/width ratio (H/S) as a percentage
R Radial tyre
15 Rim diameter in inches (Ø)
82 Load rating (capacity)
T Maximum speed index
Maximum speed index
Q up to 160 km/h
R up to 170 km/h
S up to 180 km/h
T up to 190 km/h
U up to 200 km/h
fig. 161 F0W0019
209
GETTINGTO KNOW
YOURCAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX