FIAT Panda Classic User Manual
Page 93
92
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0054m
fig. 99
F0Z0195m
fig. 100
SEAT BELT HEIGHT ADJUSTMENT
(for versions/markets where provided)
Four different adjustments in height are provided.
To adjust, press button A-fig. 99 and lower or raise the
grip B.
Always adjust the height of the seat belt to fit the person
wearing it: this precaution could greatly reduce the risk of
injury in case of collision.
Correct adjustment is obtained when the belt passes ap-
proximately half way between the shoulder and the neck.
See texts and figures in paragraph “General instructions
for using the seat belts” in this section.
Make height adjustment of the seat belts
when the car is stationary.
WARNING
After adjustment, always check that the
slider to which the ring is fastened is locked
in one of the set positions. To do this, with the
button A released, exert a further pressure to al-
low the anchor device to catch if release did not
take place at one of the preset positions.
WARNING
For some versions, front seat belts have just one fixed
anchor point C-fig. 100 on the door post.
091-110 PANDA EN 7-10-2009 13:46 Pagina 92