FIAT Panda Classic - Manual (Page 143)

142
KNOW
YOUR VEHICLE
SAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0696m fig. 130
F0Z0603m fig. 129
❒ fully tighten the bolts, passing alternatively from a bolt
to the opposite one, following the order shown in
fig. 130.
REFITTING THE STANDARD WHEEL
❒ Following the above procedure, raise the car and re-
move the space-saver wheel;
❒ make sure the contact surfaces between wheel and hub
are clean so that the fastening bolts will not come loose;
❒ fit the standard wheel by inserting the first bolt L-
fig. 128 into the hole close to the inflation valve;
❒ fit the wheel cup making the symbol C coincide with
the inflation valve and the bolt previously fastened to
the hole M-fig. 129;
❒ fasten the three other bolts with the wrench provided;
❒ lower the car and remove the jack;
F0Z0233m fig. 128
135-168 PANDA EN 7-10-2009 14:06 Pagina 142