FIAT Panda Classic User Manual

Page 141

140

KNOW

YOUR VEHICLE

SAFETY

CORRECT USE

OF THE CAR

WARNING LIGHTS

AND MESSAGES

AN EMERGENCY

CAR

MAINTENANCE

TECHNICAL

SPECIFICATIONS

INDEX

F0Z0173m

fig. 124

F0Z0233m

fig. 125

❒ remove the wheel cup (if provided) after loosening the

three fastening bolts and then undo the fourth bolt
L-fig. 125 and remove the wheel;

❒ ensure that the groove F-fig. 124 of the jack is well fit-

ted onto the tab G of the side member;

❒ warn bystanders that the car is about to be lifted. They

must stay clear and not touch the car until it is back
on the ground;

❒ fit the handle H into the jack device

and lift the car un-

til the wheel to be changed is some centimetres off the
ground. When turning the jack handle make sure that
it can be used easily and take care not to scrape your
hand against the ground. Even the moving components
of the jack (screws and joints) can cause injuries: avoid
to touch them. Clean off any lubricating grease;

135-168 PANDA EN 7-10-2009 14:06 Pagina 140