FIAT Panda Classic User Manual
Page 198
197
KNOW
YOUR VEHICLE
SAFETY
CORRECT USE OF THE
CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0111m
fig. 194
UNDERSTANDING TYRE MARKING fig. 194
Example: 155/80 R 13 79T
155 = Nominal width (S, distance between sidewalls in
mm).
80 = Height/width ratio (H/S) in percentage.
R
= Radial tyre.
13 = Rim diameter in inches (Ø).
79 = Load rating (capacity).
T
= Maximum speed rating.
WHEELS
WHEELS AND TYRES
Pressed steel or alloy rims. Tubeless radial carcass tyres.
The vehicle registration document also lists all type-ap-
proved tyres.
IMPORTANT In the event of discrepancies between the
information provided on this “Owner Handbook” and the
“Vehicle registration document”, only the latter is valid.
For safe driving, the car must be fitted with tyres of the
same make and type on all wheels.
IMPORTANT Do not use inner tubes in case of tubeless
tyres.
SPACE-SAVER WHEEL
Pressed steel wheel. Tubeless tyre.
WHEEL GEOMETRY
Front wheel toe-in measured from rim to rim:
0 ±1 mm
The values refer to the car in running order.
191-214 PANDA EN 7-10-2009 14:17 Pagina 197