FIAT Panda Classic - Manual (Page 157)

156
KNOW
YOUR VEHICLE
SAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0099m fig. 155
F0Z0098m fig. 154 F0Z0100m fig. 156
NUMBER PLATE LIGHTS
To change the bulb, proceed as follows:
❒ use a screwdriver to remove the retaining spring as
shown fig. 155 and remove the lens A-fig. 156; take out
the bulb B from the bulb-holder;
❒ replace the 12 V - 5 W pressure-fit bulb in the bulb-
holder and refit the lens.
Figure 154
D 12 V – 21 W bulb for reversing light on right light unit;
❒ rear fog light on left light unit;
❒ on right-hand drive versions, reversing light in the
left rear light unit and rear fog lamp in the right rear
light unit;
E 12 V – 21 W bulb for the direction indicators;
F 12 V – 21/5 W double-light bulb for stop light and tail
lights.
135-168 PANDA EN 7-10-2009 14:07 Pagina 156