FIAT Panda Classic - Manual (Page 49)

F0Z0122m fig. 48 F0Z0126m fig. 49
MAIN BEAM HEADLIGHTS fig. 48
With knurled ring in position 2 , push the stalk forward
toward the dashboard (stable position).
The warning light
1 on the instrument panel will come on.
Pulling the stalk towards the steering wheel, the main beams
are turned off and the dipped beams on.
HEADLIGHT FLASHING fig. 48
You can flash the beams pulling the stalk toward the steer-
ing wheel (spring-return position). The warning light
1
on the instrument panel will come on.
PARKING LIGHTS fig. 49
With the ignition key at STOP or removed, turn the
knurled ring to position
6. The warning light 3 on
the instrument panel will go on with the side/tail lights and
the number plate lights. Move the stalk upwards
a to turn
on the right side lights only; move it downwards b to
turn on the left side lights only. In both cases, the warn-
ing light
3 on the instrument panel will not light up.
EXTERNAL LIGHTS
The left-hand stalk operates most of the external lights.
The external lights can only be switched on when the
ignition key is on MAR.
The instrument panel and the different dashboard controls
will come on with the external lights.
LIGHTS SWITCHED OFF fig. 48
Knurled ring turned to position O.
SIDE LIGHTS fig. 48
Turn the knurled ring to position 6.
The warning light 3 on the instrument panel comes on.
DIPPED BEAM HEADLIGHTS fig. 48
Turn the knurled ring to position 2 .
The warning light 3 on the instrument panel comes on.
48
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
031-064 PANDA EN 7-10-2009 13:43 Pagina 48