FIAT Panda Classic - Manual (Page 158)

157
KNOW
YOUR VEHICLE
SAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
F0Z0211m fig. 158
F0Z0101m fig. 157 F0Z0210m fig. 159
❒ release the clip C-fig. 158 and remove the bulb unit from
the lens unit;
❒ replace the pressure-fit burnt out bulb D;
❒ refit by reversing the above mentioned operations.
THIRD STOP LIGHTS
To change one or more bulbs, proceed as follows:
❒ undo the two screws A-fig. 157 and remove the whole
cover;
❒ disconnect the connector B-fig. 159 and remove the
light unit;
135-168 PANDA EN 7-10-2009 14:07 Pagina 157