FIAT Panda Classic User Manual
Page 69
Once you have released the adjustment
lever, always check that the seat is locked
on the guides by trying to move it back and forth.
Failure to lock the seat in place could result in the
seat moving suddenly and the driver losing control
of the car.
WARNING
Restoring the seat position
To bring back the seat to its standard position: lift the seat
back and push it backwards until it locks and make sure
the seat belts are at the front of the seat back.
EXTENDING THE BOOT
(versions with sliding rear seat) fig. 77 and 78
Partial extension
Use the lever A (in the passenger’s compartment) or
the central tab D in the boot to move the seat forward.
Total extension
Remove the parcel shelf as previously described (see ver-
sions with fixed rear seat).
Use the lever A or the central tab D in the boot to move
the seat to the required position (e.g. fully forward for to-
tal boot extension).
Lift lever B or C or pull side tabs E or F in the boot to
release the seat backrest section to tilt; act on both if you
want to tilt the whole backrest.
fig. 78
F0Z0258m
fig. 77
F0Z0257m
68
KNOW YOUR
VEHICLE
SAFETY
CORRECT USE
OF THE CAR
WARNING LIGHTS
AND MESSAGES
IN
AN EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
065-090 PANDA EN 7-10-2009 13:45 Pagina 68