M-AUDIO DMAN - Manual (Page 27)

27
The Audio Transport control buttons are similar to those on a
tape recorder:
From left to right, these buttons are:
Play - Plays the selected audio file.
Stop - Stops playback of the selected audio file.
Pause - Pauses play.
Record - Starts recording the selected audio file.
Beginning - Goes to the beginning of the selected audio file.
Rewind - Goes backwards in the selected audio file until it
reaches the beginning of the file or until you stop the rewind.
Fast Forward - Goes forward in the selected audio file until it
reaches the end of the file or until you stop the fast forward.
End - Goes to the end of the selected audio file.
The display areas of the Audio Transport are shown below:
Audio Transport Displays
Their meanings are as follows (clockwise from upper right):
File Format Information - Displays the file audio format
including: sample rate, encoding, stereo/mono, number of
bits, and total length (in time) for the selected file.
Time Counter - Displays the current position (in time) in the
file.
Current File Display - After you select a file with the open file
command, the selected file is displayed in this window.
When a dot is displayed in the WP box, you can overwrite
the data in the file. When a dot is not displayed, the file is