Edimax Technology NS-1500n - Manual (Page 48)

47
8-7 Add/Edit Shared Folder
Parameters Description
Folder Name The name for shared folder that shows in My Network Places on
client computer.
Shared Folder
‟s
Path
Click on “Browse” to select the folder to be shared.
If you select
“Share all folders in storage”, the storage server will
create a share item for each partition of all currently attached
storages. The share name of each share item consists of three
parts, assigned folder name, disk name and partition name, and the
three parts are separated by
“_”. The disk name is USB1. For
example, if you add a shared folder by assigning “All” as the folder
name and select “Share all folders in storage”, and now you have
one USB hard disk drive with 3 partitions attached on USB port.
Then after you create the shared folder, there will be 3 share items
created with the name of
“All_USB1_C”, “All_USB1_D”,
“All_USB1_E”.
Users/Groups You can assign access privilege of the shared folder to all users and
groups here. There are three users/groups lists. The left list
contains all users and groups that have not been assigned privilege
on this shared folder. The upper right list contains all users and
groups that only have read privilege on this shared folder. The lower
right list contains all users and groups that have read and write
privileges on this shared folder. If you assign
“Read Only” or “Read
& Write
” privilege to “anonymous”, then all users can access this
folder without password.
Description The comments or descriptions for this share folder.
Shared to You can select to share the folder via My Network Places and/or