Edimax Technology BR-6478Gn - Manual (Page 61)

60
local network here.
Computer Name Computer names found in the local network are listed
here. You can select a computer name and click the
“<<” button to add the selected computer’s private IP
address to the “Client PC IP Address” field.
Add Click “Add” to add the settings to the DMZ table.
Reset Click “Reset” to clear the settings.
NOTE: Each public IP address can be mapped to one client PC IP address only.
All DMZ entries are displayed in “Current DMZ Table”:
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have
clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.
3‐6 NAT
This broadband router supports four types of NAT functions. See the following for
instructions.
3‐6‐1 Virtual Server
This function allows you to redirect a port of an Internet IP address to a specified port of a
private IP address, so you can set up an Internet service on the computer in the local
network without exposing it to the Internet directly.