Edimax Technology BR-6478Gn - Manual (Page 47)

46
close the window.
Note: If you have a pop‐up blocker installed, you
may have to disable it, or set it to allow the pop‐up
window to show up.
MAC address 1 to 4 Input the MAC addresses of the wireless access points
with which you wish to connect.
Wireless Module Select “Enable” to turn on the 2.4GHz wireless
signal and select “Disable” to turn it off.
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have
clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.
3‐4‐1‐6 Universal Repeater
In “Universal Repeater” mode, this broadband router acts as a wireless signal repeater to
extend the wireless coverage of the specified wireless access point.