Edimax Technology BR-6478Gn - Manual (Page 43)

42
3‐4‐1‐3 AP Bridge—Point to Point
“AP Bridge—Point to Point” mode connects this router to another router and allows all the
computers connected to the LAN ports of both routers to communicate with each other.
Please note that when you select this mode, this broadband router will act as a wireless
bridge only. It will not accept other wireless clients. If you wish to use this function with a
wireless access point that supports WDS, please select “AP Bridge—WDS” mode.
Item Name Description
Band Select from one of the following options:
2.4GHz (B): Allows 802.11b wireless network clients
to connect to this router.
2.4GHz (N): Allows 802.11n wireless network clients
to connect to this router.
2.4GHz (B+G): Allows 802.11b and 802.11g wireless
network clients to connect to this router.
2.4GHz (G): Allows 802.11g wireless network clients
to connect to this router.
2.4GHz (B+G+N): Allows 802.11b, 802.11g, and
802.11n wireless clients to connect to this router
(recommended).
Channel Number Select a channel from the dropdown menu. Both
access points must use the same channel (1 to 13).
MAC Address 1 Input the MAC address of the wireless access point
with which you wish to connect.
Wireless Module Select “Enable” to turn on the 2.4GHz wireless