Edimax Technology BR-6478Gn - Manual (Page 57)

56
Protocol Define the protocol type here (TCP or UDP).
Add Click the “add” button to add new QoS rules to the
table.
Reset Click “Reset” to erase all the values you have just
entered.
Edit Select a rule in the QoS table and click “Edit” to modify
the contents of a specific rule. Only one rule can be
edited at a time.
Delete Selected Select the rule(s) you want to delete and click “Delete
Selected” to perform the task.
Delete All Click “Delete All” to delete all the rules listed in the
QoS table.
Move Up The “Move Up” button moves a selected rule up in the
list, giving it a higher priority.
Move Down The “Move Down” button moves a selected rule down
in the list, giving it a lower priority.
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have
clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.
3‐5‐2 DDNS
DDNS (Dynamic DNS) is an IP‐to‐hostname mapping service for users who do not have a
static (fixed) IP address and need to provide services to other users over the Internet.
This router supports the following DDNS service providers:
z DHS ( http://www.dhs.org )
z Dyn ( http://dyn.com )
z ODS ( http://ods.org )
z TZO ( http://www.tzo.com )
z GnuDIP (
http://gnudip2.sourceforge.net )
z DyNS (
http://www.dyns.cx )