Edimax Technology BR-6478Gn User Manual
Page 41
40
select the channel of your preference (1 to 13).
Associated Clients
Click “Show Active Clients” for the list of all
connected wireless clients. Click “Refresh” in the
new window to renew the list, and click “Close” to
close the window.
Note: If you have a pop‐up blocker installed, you
may have to disable it, or set it to allow the pop‐up
window to show up.
Wireless Module
Select “Enable” to turn on the 2.4GHz wireless
signal and select “Disable” to turn it off.
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have
clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.
3‐4‐1‐2 Station‐Infrastructure
In “Station‐Infrastructure” mode, the router acts as both a wireless communication client
and a wireless communication server. The following settings will appear in
“Station‐Infrastructure” mode: