Edimax Technology BR-6478Gn - Manual (Page 44)

43
signal and select “Disable” to turn it off.
Click “Apply” to save the changes, or click “Cancel” to discard the changes. After you have
clicked “Apply”, you will see the following message:
Click “Apply” to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click “Continue” to configure other settings.
3‐4‐1‐4 AP Bridge—Point to Multi‐Point
“AP Bridge—Point to Multi‐Point” mode connects this router to up to 4 other routers and
allows the computers connected to the LAN ports of every router to communicate with
each other.
Please note that when you select this mode, this broadband router will act as a wireless
bridge only. It will not accept other wireless clients. If you wish to use this function with a
wireless access point that supports WDS, please select “AP Bridge—WDS” mode.
Item Name Description
Band Select from one of the following options:
2.4GHz (B): Allows 802.11b wireless network clients