2 network statistics screens, Network statistics screens -24, Etwork statistics screens – Zhone Technologies IMACS-200 User Manual
Page 108
4-24
General Features
Model No.
Running Head
Remote Administration
IMACS-200 General Features
b. Telnet [device IP address]
12. From the IMACS-200:
a. Ping PC on IP network
13. From a PC on a different network than the IP network:
a. Ping [device IP address]
b. Telnet [device IP address]
14. From the IAD, Ping PC on the network different from IP subnetwork.
4.7.2
N
etwork Statistics Screens
The Network Statistics Screens provide maintenance and diagnostic information for the
different protocols supported by this equipment. The system starts accumulating statistics
when the TCP/IP Port is changed from off to local or wan, and it continues to store
information until it is turned off.
Figure 4-15 shows the first of eight Network Statistics Screens, and Figure 4-15throughFigure
4-17show the other three screens. To go to the first screen, press “n” in the TCP/IP Screen to
choose Netstat from the bottom line of that screen. Table 4-10 lists the actions that can be
taken from the Network Statistics Screens, and the following paragraphs describe the
parameters in each screen.
Figure 4-15.Typical Network Statistics Screen, Page 1