Xerox 721P88200 - Manual (Page 84)

INCORPORATING XEROX VALUE-ADDED FEATURES
5-16 DOCUPRINT IPS SOLUTIONS GUIDE
Changing input trays for copy subgroups
You may need to print multi-part applications, such as invoices, that
use a different color stock for each page of the document. For
example, you may wish to print copy 1 on blue paper and copy 2 on
green paper.
To activate this feature, you must specify a different SUBGROUP
within the COPYGROUP for each different input tray you wish to use.
You must also indicate the specified BIN number on the SUBGROUP
subcommand in the copy group. For example:
The DocuPrint IPS printer selects the specified color stock from the
appropriate input tray for each copy of the invoice based on the value
entered in the copy subgroup.
You can use this feature only if you are running one of the following:
• PSF/MVS version 2.2 or higher
•
PSF/400
• InfoPrint Manager/PSF for AIX.
Output tray grouping
Using the IPS GUI, you can group certain output bins into output
groups to enable continuous output into bins or to map AFP tray
numbers to specific DocuPrint IPS output bins.
When you are printing multiple documents and do not want printing
to stop when the output bin is full, you can specify an output group
within the application. Then, when the first output bin reaches its
maximum capacity, the printer switches automatically to the next
output bin in the output group. As a result, printing is not delayed
while waiting for operator intervention.
FORMDEF MULTI; Name of the multi-part formdef
COPYGROUP MULTI; Specifies a multi-part copygroup
SUBGROUP COPIES 1 Print 1 copy and pull from
BIN 1; input tray 1 (blue paper)
SUBGROUP COPIES 1 Print 1 copy and pull from
BIN 2; input tray 2 (green paper)
SUBGROUP COPIES 1 Print 1 copy and pull from
BIN 3; input tray 3 (pink paper)
SUBGROUP COPIES 1 Print 1 copy and pull from
BIN 4; input tray 4 (yellow paper)