Xerox 721P88200 - Manual (Page 78)

INCORPORATING XEROX VALUE-ADDED FEATURES
5-10 DOCUPRINT IPS SOLUTIONS GUIDE
This table shows the resolutions available and the scaling operations
performed by the IPS software for the DocuPrint IPS printers.
Table 5-1. Printer resolutions and scaling
DocuPrint IPS
printer
Resolution (selected
in IPS user interface) IPS software scaling
operation
Printed output
resolution (dpi)
92C 240
300
600
None 1
None 1
None 1
600 by 600
180 240
300
600 2
None 3
None 2
None 2
600 by 2400
4050 240
300
240 to 300
None
300 by 300
4090 240
300
240 to 300
None
300 by 300
4635 240
300
600 1
240 to 600
None 4
None
600 by 600
96, 4635, and 180
MICR
240 5
300
600 1
240 to 600
None 3
None
600 by 600
4850 240
300
240 to 300
None
300 by 300
4890 240
300
600
240 to 300
None
None
300 by 300
300 by 300
600 by 600
1. The DocuPrint 92C IPS converts 240 dpi and 300 dpi data to 600 dpi at the controller.
2. The DocuPrint 180/180MICR IPS, DocuPrint 96/96MICR and DocuPrint 4635 IPS
accept only full-page IOCA images at 600 dpi. They do not accept any other type of
resource at 600 dpi.
3. The DocuPrint 180 IPS interpolates 240 dpi, 300 dpi, and 600 dpi to 600 by 2400 dpi
resolution at the printer’s imaging system.
4. The DocuPrint 4635 and 96 IPS interpolates 300 dpi resources to 600 by 600 dpi
resolution at the printer’s imaging system.
5. Applies only to resources other than fonts. To preserve the integrity of Xerox-supplied
300 dpi E13B and CMC-7 MICR fonts, the fonts on the DocuPrint 96, 4635, and 180
MICR IPS printers must be 300 dpi.